news

Built-in blinds common problem handling tips

Update:04-08-2016
Summary:

1. Why does the built-in louver glass stretch hard when […]

1. Why does the built-in louver glass stretch hard when used, and the hand feels too heavy?

1) The magnetic control aluminum guide rail is improperly installed, the magnetic force is biased, and the blinds are stretched effortlessly.

Solution: Remove the aluminum rail and re-install it. The aluminum rail is tightly attached to the aluminum frame without gaps.

2) The hollow louver glass control mechanism does not mount the hollow louver glass installation requirements when it is installed, resulting in the groove being too deep or inclined.

Solution: Remove the hollow louver glass and reinstall it according to the installation requirements.

3) The magnet on the magnetic handle is damaged, and the handle roller does not roll or be damaged.

Solution: Replace the damaged part.

2. Why is the built-in louver glass demagnetized?

1) The magnetic handle is located in the slack state control of the magnetic joint zone and is not fully attracted.

Solution: Re-install the magnetic handle to make the magnetic handle into tight-fitting state.

2) When the user pulls up and down the magnetic handle, the pulling speed is too fast, resulting in demagnetization of the magnetic handle.

Solution: Re-install the magnetic handle to make the magnetic handle into tight-fitting state.

0
Views: 451